When ensuring a complete sanitation to your home, plumbing assignments such as replacing a broken toilet flush valve, cannot be left pending. This would completely hurt the sanitation schema of your toilet and bathroom. Instead of availing the services of a plumber straightaway, take the assignment in your own hands.

One such issue is the replacement of the flush valve of your toilet. Beforehand make sure that the flush valve actually requires a replacement and it can’t be fixed.

Foremost thing to do before commencing any plumbing project is to notify yourself about the availability of the required plumbing tools. Do you have all those essential plumbing tools such as wrenches, screwdrivers, Teflon tape etc. in tact ? Also make sure that you’ve turned off the main water supply prior to the repair work.

Flush the toilet tank and if it doesn’t flush properly then open the lid of the tank and take out water with the help of a small container. Use a wet or dry rag to to clean out the tank completely. Once tank is emptied, locate a valve chain that is clipped to a trip arm. Detach the valve chain from the trip arm and expose the underlying setup.

After removing the valve chain, lift the clips of the flush valve or flapper from it’s bindings on the sides of the overflow tube such that the flapper is detached from the flush valve seat. Make sure that no damage is done to the affiliated fixture. Not all the flush valves are attached to the flush valve seat in the same manner hence, the method of detachment may vary. Dissociate the flush valve completely from the fixture and take it down to a local plumbing or hardware store to buy a new flush valve with the same functions as the old one. If the new valve deters from the old one in terms of it’s flapper style or clipping, then it may not fit tightly on the flush valve seat.

Install the new flush valve by resting it on the flush valve seat and attaching the side clips to the overflow tube such that the flush flapper fits well on the flush valve seat.

Clip the valve chain back to the trip arm in such a way that the flush flapper makes a good seal with the flush valve seat.

Render normal water supply to the tank and let it fill. Now test the efficiency of the newly installed flush valve by flushing the toilet.

Scott Rodgers is a distinguished author who has been providing great guidance on plumbing works all over the country. His splendid knowledge has, in fact, sparked significant rise in revenue for talented plumbers across the nation, from Dunn Loring Plumbers to Krum Plumbers.

Comments are closed.